Bellows used for screw protection:
Sewn bellows used for shaft protection:
The bellows shown below is &#;4 stories&#; tall (drilling equipment)
Large crane rigs often feature hydraulic cylinders, which are required to operate with long service life between maintenance and inspection periods.
Sewn bellows help keep abrasive grit, impinging chips, and coolant off of machine ways and ball screws. Sewn bellows boots are ideal for protecting hydraulic cylinder rods, shafts and splines. Using a bellows cover is essential for mitigating damage to actuators and motion components, thus maintaining uptime.
Common Sizes & Legacy Part Numbers
Here are the legacy part numbers representing common rod boot sizes of Gortite® Sewn Bellows made from neoprene-coated nylon fabric.
ROD BOOT STYLE Inside Diameter (ID) Outside Diameter (OD) Retracted Length every 12&#; section Available Inner Diameter (I.D.) Sizes SRA-15 3/4&#; 3&#; 3/4&#; 1/2&#; to 3&#; SRB-15 1-1/8&#; 3-3/8&#; 3/4&#; 1/2&#; to 3-3/8&#; SRC-15 1-1/2&#; 3-3/4&#; 3/4&#; 1/2&#; to 3-3/4&#; SRD-15 1-7/8&#; 4-1/8&#; 3/4&#; 1/2&#; to 4-1/8&#; SRE-15 2-3/8&#; 4-5/8&#; 3/4&#; 1/2&#; to 4-5/8&#; SRF-15 2-7/8&#; 5-1/8&#; 3/4&#; 1/2&#; to 5-1/8&#; SRG-25 3-3/8&#; 7&#; 1/2&#; 1/2&#; to 7&#; SRH-25 3-7/8&#; 7-1/2&#; 1/2&#; 1/2&#; to 7-1/2&#; SRJ-25 4-1/2&#; 8-1/4&#; 1/2&#; 1/2&#; to 8-1/4&#; SRK-25 5&#; 8-3/8&#; 1/2&#; 1/2&#; to 8-3/8&#; SRM-25 5-3/8&#; 9-1/2&#; 1/2&#; 1/2&#; to 9-1/2&#; SRO-25 7-1/4&#; 11&#; 1/2&#; 1/2&#; to 11&#;Mounting Accessories: Clamps (for end collars) or Back-up mounting plates (for flange ends) can be added to your order upon request
Sewn Rod Boot Bellows Request for Quote
1. Stock boot part number
2. Outer diameter (O.D.) of part to be covered
3. Travel distance or extended length (note: ends excluded) Stock bellows are available in 12&#; extended length increments
4. Specify type of end: Do you want a standard flange or a collar?
You will get efficient and thoughtful service from LIONSHELL.
For Collar End: Specify collar width and collar I.D. (inner diameter)
For Flange End: Specify Flange I.D. (inner diameter) and Flange O.D. (outer diameter)
5. Specify mounting options:
a. C208 Clamp: stocked in any size required, clamp band is 1/2&#; wide, minimum 1/2&#; I.D. &#; specify in 1/8&#; increments.
b. C205 flange back-up plate: shipped blank. If mounting holes are desired, please send sketch indicating bolt hole pattern and size.
Order flame resistant bellow boots and machinery protection from National Safety Apparel with customizable options to fit the needs for your hydraulic cylinders, screw jacks and caster maintenance, robotic arms and more.
A bellow boot is an accordian-like wrap that goes around a piece of machinery exposed to any general hazard and becomes a protective barrier for that equipment that could otherwise be damaged or harmed by that surrounding hazard.
Our flame resistant bellow boots seal and protect machinery against hazards including:
As a market leader in sewn FR bellow boots for the manufacturing and automotive industries, National Safety Apparel provides customizable options just for you. We manufacture bellow boots in various shapes, sizes, configurations and materials for multiple hazards.
National Safety Apparel offers custom manufacturing options for bellow covers including: