Manufacturing Process of Glass Smoking Devices

Glass bongs are oddly and intricately constructed. Most hookahs consist of a pipe, a straw, a bucket, a bin, a hand rest, a pin, tweezers, and a seat. The pipe has a nest at one end and a thin tube that extends into the water of the water pipe, which is often placed in the front.

Glass bongs are oddly and intricately constructed. Most hookahs consist of a pipe, a straw, a bucket, a bin, a hand rest, a pin, tweezers, and a seat. The pipe has a nest at one end and a thin tube that extends into the water of the water pipe, which is often placed in the front. The pipe is located after the pipe, the upper end of the backward bend, easy to smoke, the lower end connected to the bucket, but above the water in the bucket. The pipe, straw, and water pipe are generally a single unit, with one end for air intake and one end for smoking, two upturned ends, and water storage in the center. Smoking, the pot must be filled with water, smoke through the water storage, plays a role in making the smoke filtered and cooled, etc., but also a pleasant cooing sound. Smoke warehouse is mostly barrel-shaped, on the lid, in order to prevent the smoke from drying out. The handpiece mainly plays a role in connecting the water pipe and the tobacco warehouse are inserted in it.

The technology that will definitely be used in production is polishing technology. Do you know how this technology was developed? How is this technology implemented? Below, our company will provide a detailed introduction to the polishing technology of glass hookahs.

The theory of forming and the mechanism of baking can be improved by surface flame treatment, which is the surface flame polishing of glass products. The surface polishing of glass products has a wider range of applications. In order to give glass products a certain shape, certain fixtures and molds must be used in actual production. This will leave mold contact marks on the glass surface. At the same time, when forming products with small mouth and large bottom, the mold needs to be split to remove the product. The surface of the product will leave protruding line marks, which are closely related to the manufacturing accuracy of the mold, whether new or old, the locking force during molding, the size of the molding force, as well as the temperature of the glass material and mold, the cooling structure of the mold, etc.

Glass hookah guns and a series of other products are all glass products. They are usually made of organic glass, which is then cut into a certain shape and then pasted on a flat surface to form these products. There are many different methods to process and shape them when pasting them, such as hot pressing, which heats them up and then performs hot pressing inside the grinding tool. This molding method produces a very full and smooth product shape, with a very strong three-dimensional feeling. And it can also create a relief effect.

The inlay method of glass hookah is to cut some organic glass blocks of different colors into the geometric shapes we need, and then inlay and assemble them on the bottom plate. This method has very strict requirements for the work, requiring very tight splicing and sharp edges, so as to receive a strong sense of color and make people feel seamless without a great sense of abruptness.