A tiltable monitoring street light pole, also called "folding arm monitoring street light pole" or "folding monitoring street light pole" (hereinafter collectively referred to as the tiltable pole), the top of this pole can be installed as a security camera
A tiltable monitoring street light pole, also called "folding arm monitoring street light pole" or "folding monitoring street light pole" (hereinafter collectively referred to as the tiltable pole), the top of this pole can be installed as a security camera, can also be installed street light source, or both, tiltable pole, as the name suggests, is a functional pole can be tilted, and the traditional street light pole, pole monitoring pole compared to the top of the pole has a great advantage, because the traditional pole top load equipment maintenance, because the traditional pole, pole monitoring pole, the pole has a great advantage. As the name suggests, a functional pole can be tilted, and the traditional street light pole, pole monitoring pole compared to this pole in the maintenance of the top load equipment, is a great advantage, because the traditional pole top load, whether it is a street light source, or monitoring cameras, as long as there is a problem, it is only through the elevator equipment, to complete the task of repair or replacement, time-consuming, laborious, and costly funds.
The emergence of the tiltable rod, is an effective solution to all kinds of problems arising from the maintenance of equipment, when the top load equipment problems, only one maintenance personnel, through the tiltable rod special crank, will be able to easily dump, the entire dumping process can be controlled within one minute, it can be said that the efficiency is still very high. There are many types of tilt rods, including worm gear type, cylinder hydraulic type, and wire rope winch type, the following will be a variety of structures tilt rods, do a simple introduction.
Turbine worm type: This type of pole body can be tilted and folded part, is by a worm with a worm gear structure, by turning the worm, so that it drives the worm wheel rotation, to drive the pole body dumping, because of this type of pole body of the whole set of driving device, are installed in the pole body, so, in the appearance of the aesthetic, does not have any problem. However, due to its "leverage principle", this type of pole, in height will receive a certain degree of restriction, usually the total height does not exceed 10 meters.
Cylinder hydraulic: this type of rod, in terms of height, diameter, top load, etc., is better than the "worm gear type", because the cylinder can provide a strong enough lifting force, this force, is incomparable to manpower, so it can break through the height limitations, but it is the same there are shortcomings, for example, each time the maintenance of the rod loaded with equipment on the top, you need to be prepared in the field of a generator, motors, cylinders, and then fixed, the best way to operate, maintenance, and also to dismantle all of this equipment, consuming a long time, the operator's technical skills are also required to be relatively high.
Wire rope winch-type: this type of tilting bar, without the use of any electrical equipment, the operator is also too many technical requirements, can be easily operated, "turbine worm gear tilting bar" and "cylinder hydraulic tilting bar" advantages and disadvantages, its working principle, it is mainly through the external wire rope winch, through the main bar at the bottom of the fixed pulley, and then connected to the bottom of the sub-bar, this structure can be "lever principle" control a more balanced point. Mainly through the external wire rope winch, through the main pole body at the bottom of the fixed pulley, and then connected to the bottom of the secondary pole body, this structure can be "leverage" control in a more balanced point, so that, in the operation appears to be much easier, although this type of pole has many advantages, but does not mean that it does not have the disadvantages, its disadvantages are mainly reflected in the "turbine worm gear tilting rod" and "cylinder hydraulic tilting rod" advantages and disadvantages. Disadvantages, its shortcomings are mainly reflected in the aesthetics, because the wire rope winch is external, through the bolts to be fixed on the outside of the pole, and the whole set of equipment all exposed on the outside, the aesthetic will have a certain impact, if each time you finish removing it, then it will seem very troublesome.
When choosing a tiltable bar, it is still necessary to decide exactly what type of bar to use according to the needs of use, comprehensively weighing the characteristics of each, and choosing the most suitable.