You can find more information on our web, so please take a look.
The FR fire resistant sidewall conveyor belt can make all kinds of bulk materials with 0-90 degrees to be used for continuous conveying, with large inclination, wide range of use and small area.
No transfer point, less investment in civil construction, low maintenance cost, large throughput, etc., solve the transportation Angle that ordinary conveyor belt or pattern conveyor belt cannot reach.
The base belt consists of four parts: Top cover rubber , fabric layer and bottom rubber cover.
The cover rubber thickness is generally 3-6mm;
The cover thickness is generally 1.5-4.5mm.
The material can be made of cotton fabric (CC), nylon fabric (NN), polyester fabric(EP) or steel cable (ST).
In order to increase the transverse rigidity of the basebelt, a special strengthening layer is added in the core body, which is called transverse rigid layer.
The width of the basebelt is the same as that of ordinary tape, which conforms to the standard of GB/ t-.
1) Tear resistant element
new type steel cord
2) Reinforcement layer
steel cable, steel cord, fabric, etc
3) Feature
excellent impact and tearing resistance performance
Steel Reinforced Rubber Conveyor Belts type & standard
1) Normal grade &#; GB/T-
2) Flame resistant &#; MT 668-
3) General used flame retardant &#; HG/T-
4) Heat resistant &#; GB/T -
5) Abrasion resistant &#; Shore abrasion&#; 90mm3
6) Abrasion & heat resistant &#; below 125 degree, abrasion &#; 150mm3
7) Tear resistant &#; HG/T-
8) Cold resistant &#; HG/T-
Features:
Cover type: General, Fire-resistant, Cold-resistant, Abrasion-resistant, Heat-resistant and Chemical-resistant.
Standards offered: GB/T, DIN, EN ISO , SANS and AS.
FR fire resistant conveyor belt Production flow & OEM -Monster belting
Screw Reinforcement sets are available in a selection of sizes
to suit specific cleat designs as follows:
Type 1 Cleat height 75mm
Type 2 Cleat height 90mm to 110mm
Type 3 Cleat height 110mm
Type 4 Cleat height 140mm to 180mm
Type 5 Cleat height 180mm to 230mm
Type 6 Cleat height 230mm to 280mm
Type 7 Cleat height 280mm to 600mm
Belt Handling
Monster RUBBER Conveyor Belts leave the production line packed in such a way as to ensure safe transportation. It is essential that when offloading and unpacking the belt that the utmost care be taken not to damage the belt. The belt should be unpacked as the following sketches, it is most important that under NO CIRCUMSTANCES should a steel cable or rope be used to lift the belt either out of a crate of onto the conveyor.
1.Fabric Conveyor Belt
Fabric conveyor belts are suitable for medium and long distance, heavy load and high
speed transportation of materials, which is widely used in mines, metallurgy, architecture,
ports, electricity, chemical industries, etc.
NN fabric
- High stability
- Short pulley diameter
- High heat resistance
- Strong anti-shock
- Excellent adhesive force to rubber
EP fabric
- Low elongation
- Strong anti-shock
- Excellent adhesive force to rubber
- High stability
- Temperature&#;140ºC
(It will decompose over 140ºC)
Characteristic:
1.High strength, thin belt, light weight.
2.EP dipped canvas was used as skeleton material.
3.The belt has soft body, good grooving and good elasticity.
4.Shock resistance, wear resistance, corrosion resistance.
5.It is suitable for large load, fast speed and medium and long distance material transportation.
6.It runs smoothly without deviation.
Specifications and technical parameters of EP conveyor Belt
Fabric type
Fabric construction
Fabric type
Rubberized fabric thickness
Strength series(N/mm)
Covering rubber
thickness(mm)
Width range(mm)
through
weft
2layer
3layer
4layer
Top covering adhesive
Lower covering compound
EP
EP
Cotton fiber
EP-80
1
160
240
320
0-12
0-10
300-
EP-100
1
200
300
400
EP-125
1.05
250
375
500
EP-150
1.1
300
450
600
EP-170
1.1
340
510
680
EP-200
1.2
400
600
800
EP-250
1.4
500
750
EP-300
1.6
600
900
EP-350
1.7
EP-400
1.9
EP-500
2.1
Adhesive strength and elongation
Core material
Adhesion strength
Elongation property
Interlayer
Overburden and cloth layer N/mm
Longitudinal Full Thickness
Longitudinal Full Thickness
N/mm
Overburden thickness &#;1.5mm
Overburden thickness &#;1.5mm
Elongation at break
Reference elongation
Polyester canvas
&#;5
&#;4.5
&#;5
&#;10%
&#;4%
Overlay Performance of Adhesive Tape
Overlay Level
tensile strength
Elongation at break
Wear volume
Change rate of tensile strength and elongation at break after aging
Mpa
Kgf/cm²
%
mm³
%
H
24
240
450
120
-25 ~ +25
D
18
180
400
100
-25 ~ +25
L
15
150
350
200
-25 ~ +25
--Flame Resistant Fabric Conveyor Belt for General Use
It's especially used in aboveground coal washeries, power plants, and non-coal underground mining. The safety meets GB.
The product is made of nylon canvas or EP canvas and finished through the processes of calendering, assembling, vulcanizing, etc. The unique formula enables it to work continuously in a flammable environment.
Grade
Tensile
strength
min
(ISO37)
Mpa
Elongation
at
break
min
(ISO37)
%
Abrasion
Max.
(IS)
mm
D
18
450
200
L
14
400
250
Items
Flame
resistant
grade
K2
K3
Duration of flame
The total duration of flame of 6 test
pieces with covers is less than
45S,any individual test piece does not
exceed 15 S
Average value of duration of flame
of 3 test pieces with covers does
not exceed 60S
Anti-static property
&#;3×108Ω
Reapperance
There should be no reappearance of flame on any test piece
Heat Resistant, High Temperature Resistant Fabric Conveyor Belt
It is suitable for conveying high temperature solid materials like sintering ore, coke, cement clinker, etc. which is used in metallurgical, cement, chemical industry and so on.
Developed new structure carcass materials will reduce the strength loss of heat aging during running, and thus will extend the working life.
The cover uses superior ethylene-propylene rubber or halogenate rubber which will enhance the high temperature resistant property of the rubber and reduce the loss of heat aging.
Item
GBStandard
ZHENXING Standard
T1
T2
T3
T4
DAHR150
DAHR180
Test
temperature
&#;100ºC
&#;125ºC
&#;150ºC
&#;175*ºC
&#;150*ºC
&#;180ºC
Permitted
change
range
Hardness
Difference before and after aging
+20
+20
±20
±20
±10
±10
Maximum after aging
85
85
85
85
75
75
Tensile
strength
Change rate of property %
25
30
40
40
±15
±25
Minimum value after aging
12
10
5
5
10
8
Elongation
at
break
Change rate after aging %
50
50
55
55
±15
±15
Minimum value after aging
200
200
180
180
400
350
Oil Resistant Fabric Conveyor Belt
Oil resistant conveyor belts select the NBR with excellent oil resistant properties as the covers. The reinforced materials can be selected according to customers' requirements. It's suitable for conveying oily materials or the environment that exposure to a variety of working oil.
Low rate of volume change
High maintenance of strength
Wide application ranges
Type
Rubber
material
Permissible
temperature
ºC
Application
areas
COR
NBR/BR
35~70
Conveying products containing animal and
vegetable oil and fat in cold areas
MOR
NBR/SBR
-20~70
Most products containing animal and
vegetable oil and fat
OR
NBR
20~70
Products containing mineral oi
HOR
NBR
20~120
Hot asphalt
Anti-tear Fabric Conveyor Belt
It's suitable for transportation of hard and sharp materials in larger drop height occasions, used in lines of mines, ports, electricity, metallurgy, chemical industry, coalmines, etc.
The anti- tear conveyor belt has highly extensible transverse polyester or nylon canvas evenly arranged in the top cover (or both top and bottom cover) of the steel cord carcass. The anti-tear layer is perpendicular to the running direction of belt. When the belt conveys hard and sharp materials, the anti-tear layer can stop it from being pierced. Even if the belt is pierced, the anti-tear layer can still prevent it from being torn.
In accordance with ISO- standard
Grade
Tensile
strength
min
(ISO37)
Mpa
Elongation
at
break
min
(1SO37)
%
Abrasion
Max.
(IS)
mm3
H
24
450
120
D
18
400
100
L
15
350
200
Ka
15
350
200
Note:Ka for flame-resistant and anti-static belts in accordance with ISO340 and ISO284
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Cold Resistant Fabric Conveyor Belt
Fabric cord resistant conveyor belts are suitable for conveying materials outdoors in freezing area, cold storage and etc.
The product selects nylon canvas or EP canvas as carcass. Cover rubber selects a blend of NR and BR, which has the properties of high elasticity, shock resistance, cold resistance and etc. It can work normally under the conditions of -60oC.
Cover Grades
Grade
Tensile
strength
min
(ISO37)
Mpa
Elongation
at
break
min
(ISO37)
%
Abrasion
esistance
max.
(1S)
mm
H
24
450
120
D
18
400
100
L
15
350
200
Tensile cold-resistant
coefficient C1(-45ºC)
&#;0.3
lensile cold-resistant
coefficient C2(-50ºC
&#;0.2
Note:C1
-working temperature-45ºC~60ºC;C2-working temperature-60ºC~60ºC
Straight Warp Conveyor Belt
Straight warp conveyor belts are suitable for conveying materials in larger drop height, high
load and high speed occasions, which are widely used in mines, ports, electricity, etc.
Thin carcass:
Replacing the multilayer structure with 1 or 2 plies, which will reduce 7%~17% of the full thickness
and improve sinuosity, making the belt running well with the smaller pulley, and the single roll length
will be 400~500 to reduce loss.
High strength:
With the special weaving method of high denier fiber, the tensile strength of the fabric layer will be
improved, and the working elongation of the conveyor belt will be reduced.
Excellent toughness:
The special structure of straight wrap can absorb impact better than ordinary EP or NN fabric, which
will extend the service life of the belt.
Type
Ply
Strength
N/mm
SW500
1 or 2
SW630
1 or 2
SW800
1 or 2
SW
1
SW
1
SW
1
SW
1
&#;
In accordance with ISO- standard
Grade
Tensile
strength
min.
(1S037)
Mpa
Elongation
at
break
min.
(ISO37)
%
Abrasion
max
(IS)
mm
H
24
450
120
D
18
400
100
L
15
350
200
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Straight Warp Conveyor Belt
Combined with high strength, lightweight materials and multifunction cover materialse
aramid conveyor belt are suitable for various application areas.
Low energy consumption
The structure of straight warp and straight weft consists of aramid cords in warp and nylon cord in weft in both sides which will protect the belt. The lightweight aramid conveyor belt can reduce the power consumption of the conveyor.It will save more energy by using energy-saving rubber with low rolling resistance as the pulley side.
Impact resistance
As the toughness of aramid fabric can protect the conveyor belt from being punctured by sharp conveying materials. It can also reduce the damage of the conveyor belt even if in high drop distance.
High heat resistance and flame resistance
High heat resistance property will protect the conveyor belt from being damaged by conveying materials with high temperature. Even the burning substance is not easy to penetrate the aramid core.
Anti-corrosion
Aramid, as the man-made fabric itself is superior resistant to media. Otherwise, it has excellent properties in chemical resistance and corrosion resistance.
Optimized belt design for a long lifetime
As there's single fabric ply only, the carcass is light and flexible with optimum strength utilization. Aramid conveyor belts are excellent in fatigue resistance throughout their lifetime. Top and bottom cover meet high demands on wear and impact resistance,which provides the optimum protection for the valuable aramid.
Specifications
Longitudinal
tensile
strength
(N/mm)
Min
transverse
tensile
strength
(N/mm)
10%load
elongation
(max.)
Coyers
standard
(mm)
Belt
thickness
(mm)
Belt
weight
(Kg/m2)
DPP800
800
150
0.5
6+2
11.5
11.0
DPP
150
0.5
6+2
11.5
11.1
DPP
150
0.5
6+2
11.6
11.3
DPP
180
0.5
6+3
12.0
12.9
DPP
180
0.5
6+3
12.3
13.1
DPP
180
0.5
8+3
14.5
15.9
DPP
180
0.5
8+3
14.5
16.1
DPP
200
0.5
8+3
14.6
16.3
DPP
200
0.5
8+3
16.3
17
PIPE Fabric Conveyor Belt
Fabric pipe conveyor belt is a new type of conveying belt which uses EP/NN as carcass, high elastic, high anti-abrasive and high strength rubber as working surface. It's mainly used in conveying materials which are easily polluted like power, granular materials, etc. when working, the rubber belt changes its form from flat to U shape and finally to pipe, folding the materials and realizing the process of enclosed conveying.
Enclosed conveying of materials, protecting both the materials and the environment.
Steep angled conveying, the conveying angle can reach 30° usually.
Conveying line can be arranged according to the curve of space.
Strength
(KN/m)
No
of
plies
CarcasS
type
Belt
width(mm)
300400
500
600
750
800
9
300
00
For more information, please visit haichuan.
160
2
NN/EP
250
2~3
NN/EP
315
2~4
NN/EP
400
2~4
NN/EP
500
2~5
NN/EP
630
3~6
NN/EP
800
3~6
NN/EP
3~6
NN/EP
3~6
NN/EP
3-6
NN/EP
4~6
NN/EP
4~6
NN/EP
5~6
NN/EP
5~6
NN/EP
Note: It can be customized according to customers' requirements.
Nominal
pipe
diameter
mm
φ150
φ200
φ250
φ300
φ350
φ400
φ500
φ600
φ700
φ800
Width
mm
600
800
In accordance with HG- standard
Grade
Tensile
strength
min.
Mpa
Elongation
at
break
min.
%
Abrasion
Max.
mm²
H
25
450
120
D
18
400
90
T1/T2
10
300
200
Ozone resistant test condition:50pphm,40±2ºC,elongation:20%,time 96hours,no cracks
T1-heat resistant 100C work condition,T2-heat resistant 125Cwork condition
The values will help to determine the appropriate cover compound for the application or for the materials carries
Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Acid-Alkaline Resistant Fabric Conveyor Belt
Suitable for conveying materials with chemical corrosiveness in chemical factories, chemical fertilizer factories, paper mills, mining industries, etc.
Selecting nylon canvas or EP canvas as the carcass, the belt has good elasticity and excellent troughability. The rubber cover, which is made from acid- alkaline resistant materials, has great anti-chemical corrosiveness and good physical properties.
tems
Tensile
strength
Mpa
Elongation
and
break %
Abrasion mm3
Hardness
Qzone
deterioration
Cover
Physical properties
e14.0
&#;400
s250
55-70
No cracks
Acid and
Alkali
resistance
Class
Soak
liquid
Density
Soak
conditions
Cxh
Change rate before and
after soaking
Swelling
rate
Change rate of
tensile
strength
A1
HCL
18%
50°ºC×96h
<+10%
&#;-10%
A2
H2SO4
50%
50°ºC×96h
<+10%
<-10%
A3
NaOH
48%
50°ºC×96h
<+10%
<-10%
Chevron Conveyor Belt
------We have more than 64 Chevron Mold.
------Support custom (Chevron )pattern mold.
4.STEEL CORD CONVEYOR BELT (Steel Wire Rope Core Rubber Conveyor Belt)
The steel wire rope core conveyor belt is a rubber conveyor belt with steel wire as its skeleton. It has the advantages of high tensile strength, good impact resistance, long service life, small use elongation, good grooving, good flexibility resistance, and is suitable for long-distance, large-distance and high-speed conveying materials. The product is composed of core glue, wire rope, covering layer and side glueaterials.
Characteristic:
1,High allowable strength and high safety factor;
2,Minimal elongation, short stretching distance;
3,The steel wire rope is firmly bonded with rubber and has excellent dynamic performance;
4,Soft belt body, good grooving, good linear operation;
5,Excellent impact resistance;
6,Reliable joint, long service life.
Main Technical Parameters of Steel Wire Core Conveyor Belt in Germany
project
Number of wire rope roots
Width specification/mm
500
650
800
Minimum Tensile Strength N/mm
Wire rope diameterd(maximum)
Rope distance±1.5mm
Covering glue thickness (minimum)
width
Width specification/mm
±5
±7
±8
±10
±10
±12
±12
±14
St
4.1
12
4
39
51
64
81
97
114
131
147
St
4.9
14
4
34
44
55
69
84
98
112
127
St
5.6
15
4
-
-
50
64
77
90
104
117
St
5.6
12
4
-
-
64
81
97
114
131
147
St
7.2
15
5
-
-
-
64
77
90
104
117
St
8.1
15
5.5
-
-
-
64
77
90
104
117
St
8.6
15
6.5
-
-
-
64
77
90
104
117
St
8.9
15
7
-
-
-
64
77
90
104
117
Performance Grade of Covering Rubber
Grade code
tensile strength,Mpa&#;
Elongation at break,%&#;
Wear volume,mm³&#;
D
18
400
90
H
25
450
120
L
20
400
150
P
14
350
200
notes:
D-Strong Wear Working Conditions;H-Strong splitting working conditions;L-General working conditions
P-Oil-resistant, heat-resistant, acid-alkali-resistant, cold-resistant and general non-flammable conveyor belts
Performance Grade of Covering Rubber
Executive standard DINstandard
Performance grade
tensile strength
Tensile ratio at break
Wear volume
<=mm³
W
18
400
90
X
25
450
120
Y
20
400
150
K*
20
400
200
notes:*Suitable for general flame retardant conveyor belt conforming to DIN.Its covering glue meets the requirements of DIN.
5.Heat Resistant CONVEYOR BELT (HR,EPDM,SBR+EPDM)
The core of the product is polyester canvas with high modulus, low shrinkage and high breaking strength. The covering rubber is made of ethylene propylene diene monomer or chlorinated butyl rubber with good high temperature resistance. It is refined with high temperature resistant materials in conformity with forming and vulcanizing processes. After special impregnation and setting treatment, the product has high bonding strength, small elongation deformation and excellent abrasion performance under normal service conditions below 180 C. Mainly used in metallurgy, construction and other industries, transport sinter, coke, cement clinker and other high-temperature materials.
Physical property indexes
project
category
T1
T2
T3
T4
Test temperature
&#;100ºC
&#;125ºC
&#;150ºC
&#;175ºC
Permissible range of change
hardness
Difference between post-aging and pre-aging
20
20
±20
±20
Maximum after aging
85
85
85
85
tensile strength
Performance change rate/%
-25
-30
-40
-40
Minimum post-aging value/Mpa
12
10
5
5
Elongation at break
Post-aging change rate/%
-50
-50
-55
-55
Minimum value after aging/%
200
200
180
180
6.Fire Resistant CONVEYOR BELT (K2,K3)
This product is refined from polyester canvas and nylon canvas through calendering, forming and vulcanizing processes. This product is suitable for conveying non-corrosive, non-spiky, bulk, granular and powder materials, such as coal and other bulk or finished goods, in the upper inflammable and explosive environment of coal mines.
Overlay Performance
project
Company
level L
level D
tensile strength
Mpa
&#;14
&#;18
Elongation at break
%
&#;400
&#;450
Safety performance
project
Flame Retardant Grade
K2
K3
Flame duration
The total flame duration of six coated specimens is not more than 45s, and any single value is not more than 15s.
The average flame duration of three coated specimens is not more than 60 s.
Electrostatic conductivity &#;3*10 8Ω
Reburning property
No flame shall reappear on any specimen
7.High Abrasion Conveyor Belt
Through the measures of lightweight conveyor belt body, increasing rubber elasticity and reducing rubber friction coefficient, the operation resistance of conveyor device to belt surface during conveyor belt operation can be greatly reduced, and reasonable transmission friction coefficient can be obtained, which can save electricity by 10-15%.The effect. The surface coating has high elasticity and excellent wear resistance, which makes the conveyor belt wear-resistant, impact-resistant and prolongs its service life. It is suitable for medium and long distance material transportation in mining, wharf, electric power, metallurgy, chemical industry, coal and other industries.
Product characteristics:
It saves electricity, does not need equipment modification and has high safety factor.
8.Oil Resistant CONVEYOR BELT
Oil Resistant Belt The nylon canvas and polyester canvas are refined by calendering, forming and vulcanizing processes. They have good oil resistance and are suitable for oil-containing materials in conveyor belts and occasions where oil and chemical solvents may occur. Specifically, it has the advantages of low volume change rate, high strength and wide application range.
Technical index
1. Oil-resistant conveyor belts can be divided into wear-resistant type (D) and general type (L) according to their covering properties.
2. Oil resistance can be divided into Y1 and Y2 grades.
9.Anti Tear CONVEYOR BELT
The conveyor belt is equipped with high-elongation steel wire rope or high-strength high-elongation chemical fibre rope arranged horizontally uniformly on the top (or up and down) of the steel wire rope core or fabric core as a tear-resistant layer, and the tear-resistant layer is perpendicular to the running direction of the conveyor belt. When conveyor belt conveys hard and sharp material, tear resistant layer can prevent sharp and hard material from penetrating. Once penetrated, it can also produce enough resistance to tear belt by sharp and hard material, thus effectively preventing conveyor belt from tearing.
The conveyor belt is suitable for mining, wharf, metallurgy, building materials, coal and other occasions where the conveyor conveys sharp hard objects and the blanking height is high.
10.Akli-Acid Resistant Belt
it is a kind of inert material which is suitable for working environment in contact with acid and alkali, such as phosphate fertilizer manufacturing, seawater salt drying, covering rubber and plastic blending and filling with excellent acid and alkali resistance.
Technical indexes
project
tensile strength/Mpa
Elongation at break%
Wear volume/mm³
hardness/Ao
Ozone aging
Cover gum
physical property
Before aging
&#;14.0
&#;400
&#;250
55-70
No crack
After aging
&#;12.0
&#;340
--
60-75
--
Acid and alkali resistance
category
Soaking solution
concentration
Soaking condition
Performance change rate before and after soaking
Volume Expansion Rate
Tensile Strength Change Rate
A1
hydrochloric acid
18%
50ºC×96h
+10%Following
-10%within
A2
sulphuric acid
50%
50ºC×96h
+10%Following
-10%within
A3
sodium hydroxide
48%
50ºC×96h
+10%Following
-10%within
Test conditions:Ozone concentration(50±5)*10(volume fraction),temperature(40±2)ºC,elongation(20±2)%,time15h
11.Filter belt
Filter Conveyor belt
continuous washing, excess rate, drying and regeneration of filter cloth can be realized. It has the advantages of high filtration efficiency, large production capacity, good washing effect and low moisture content of filter cake. Flexible operation and other characteristics. The conveyor belt is a complete set of belt vacuum dehydrator. It is widely used in the continuous excessive dehydration of chemical industry (especially fertilizer); aluminium hydroxide, coal slurry, metal concentrate, metal flotation and comprehensive utilization, mining tailings dehydration mining production; especially in environmental protection projects such as gypsum dehydration in flue gas desulfurization of power industry and solid-liquid separation of sewage treatment.
12.Pipe Conveyor Belt
Pipe Conveyor Belt refers to the conveyor belt matched with the circular pipe belt conveyor, which forms the shape of a circular pipe in the whole or part of the transportation line by means of external force.Pipe Conveyor Belt,the core body is composed of high strength canvas or steel wire rope, high strength, high wear resistance and high quality rubber as upper and lower covering layer. When working, the tape gradually changes from plane to U shape, and finally rolls into tubular shape to implement closed conveying.
Applicable to coal, mine, port, electric power, metallurgy, building materials and grain industries, which have strict requirements for environmental protection and material transportation for bending in three-dimensional space. Fully enclosed material transportation, no material flying, not affected by natural conditions, not affecting the environment, bendable, large inclination, round-trip transportation of materials.
Technical parameters of Pipe Conveyor Belt
pipe diameter/mm
bandwidth/mm
Breaking strength
Fabric layer
Covering glue thickness/mm
N/mm
100
430
250
1
3.0×1.5
150
600
160
2
3.0×2.0
315
2
3.0×2.0
200
750
500
2
3.0×2.0
315
2
3.0×2.0
500
2
5.0×2.0
250
2
5.0×2.0
250
400
2
3.0×2.0
500
2
3.0×2.0
400
2
5.0×2.0
500
2
3.0×2.0
300
400
2
3.0×2.0
500
2
3.0×2.0
400
2
3.0×2.0
500
2
5.0×2.0
350
630
3
5.0×2.0
800
4
5.0×2.0
400
800
4
5.0×2.0
5
5.0×2.0
13.Rough Top Conveyor Belt
Rough top belt can be used for tilt angleLight materials such as bags, boxes and parcels are transported at 35 degrees angle. The top rubber surface is wear-resistant and skid-resistant rubber. It has the functions of cushioning, shock absorption and stabilization for material transportation, especially anti-skid.
From now until China's Spring Festival in , the price advantage is obvious. The price is reduced by 5% from the original order price.Welcome Inquiry Us.
Are you interested in learning more about Mt668 Flame Retardant Conveyor Belt? Contact us today to secure an expert consultation!